5-1
Adjustment of the Payout Rate
5-1-1
Adjustment of the Front Edge
By adjusting the vertical position of the front edge of the playfield, the field payout rate -
(the ratio of the number of coins dispensed to the playfield to the sum of coins inserted
and coins discharged from the coin hopper (C)) - can be varied.
When the front edge is raised, the playfield rate decreases and when the front edge is
lowered the rate increases.
1.
Unlock and open the Playfield door.
2.
Remove 1off socket head screw (M4x6) and remove the left side cover.
3.
Loosen 2off socket head screws (M4x6) and remove the top.
Left-side cover
Socket head screw
(M4 x 6)
4.
Loosen 3off socket head screw (M4x14)
Note: Do not remove these screws, as internal parts will become detached
and fall out of place.
Ensure that the screws are re-tightened after adjustment
Raises
Scale
Edge slider
Socket head screw (M4 x 6)
Raises
Lowers
Lowers
Page 43
Socket head screws (M4 x 14)
Top
Front edge