Replacing The Polysliders - NAMCO PAC-MAN BALL Manual Del Usuario

7-8-5

Replacing the Polysliders

1. Switch the power to the machine OFF.
2. Open the maintenance panel on the rear of the machine.
3. Remove the coins from the coin hopper for the Polysliders to be replaced.
(see 6-2-6 page 81)
4. Remove the Coin Hopper and Escalator.
(see 7-8-1 page 125
5. Remove 1off E-ring, 1off spring, and replace the Polysliders.
6. Re-assemble in reverse order.
• If the roller on the slide section does not rotate smoothly, replace the
polysliders.
•
Install a new E-ring when polysliders are replaced.
and 7-8-3 page 128)
Spring
Roller
Page 131
E-ring
Polyslliders