Cleaning The Coin Hoppers - NAMCO PAC-MAN BALL Manual Del Usuario

6-2-5

Cleaning the Coin Hoppers

Do not use organic solvents such as thinners, petroleum spirits etc. as these
can damage the machine.
1. Remove coins from the Hopper.
2. Turn OFF and disconnect the power from the game.
3. Disconnect the connector and remove the Coin Hopper.
4. While holding the Eject Lever pulled forward, lift and detach the Hopper Head
from the Coin Hopper.
Hopper head
5. Wipe clean with a dry soft cloth. If it is excessively dirty, dampen a soft cloth with
a neutral detergent and wipe clean.
6. Re-install in reverse order.
Note:
•
When refitting the Hopper Head, insert the hole located at the back of the
Hopper Head into the protrusion on the Coin Hopper, and engage the Eject
Lever for secure installation
Hole
(see Motor Test - page 61)
Coin hopper (L), (R)
Eject lever
Hopper head
Protrusion
Page 80