6.
Remove the maintenance panel from the rear of the cabinet.
7.
Remove one pozi head screw (M4x6) and remove the escalator from the
coin hopper (C)
Remove 4off flange socket head screws (M4x10) and remove the Chute
Hopper Holders B and the escalators from the coin hoppers (L), (R).
* In this step, be sure to hold each escalator to prevent it falling.
Pozi head screw (M4 x 6)
Escalator for coin hopper (C)
8.
Disconnect 4off connectors, remove 6off flange socket head screws
(M4x20), and remove the Panel Assy
Flange socket head screw
(M4 x 20)
Flange sockets head screw
(M4 x 20)
Chute hopper holders B
Escalator for coin hopper (L)
Escalator for coin hopper (R)
Connectors
Panel Assy
Page 107
Flange socket head screw
(M4 x 20)