Orbea BLUE PAPER RISE Manual Tecnico página 55

108 | ORBEA
FOX FLOAT DPS AND FLOAT X SHOCKS SUGGESTED COMPRESSION
AND REBOUND ADJUSTMENTS
SUGGESTED COMPRESSION AND REBOUND SETTINGS: Based on air pressure once the target SAG has been reached
FOX FLOAT DPS
Recommended
Air pressure Air pressure
rebound
(psi)
setting (clicks)
<100 Open
100-120 11
120-140 10
140-160 9
160-180 8
180-200 7
200-220 6
220-240 5
240-260 4
260-280 3
280-300 Close
AIR VOLUMEN REDUCERS
ON FOX SHOCKS
air volume reducers, which you can purchase from a Fox
FOX FLOAT DPS VOLUME REDUCER CONFIGURATION
Reducers volume installed
Shock size
from factory
210x55
FOX FLOAT X
Recommended
rebound Low speed compression LSC
(psi)
setting (clicks)
<100 10
100-120 10
120-140 9
140-160 8
160-180 7
Turn the dial clockwise
for more compression (Firm)
180-200 6
and counter-clockwise for
less compression (Soft)
200-220 5
220-240 4
240-260 3
260-280 2
280-300 1
FOX FLOAT X VOLUME REDUCER CONFIGURATION
Reducers volume
Shock size
installed from factory
210x55
* The Float X Factory Kashima shocks are delivered from
TECHNICAL MANUAL B LUE PAPER RIS E · H YD RO 2022
FOX FLOAT X VOLUME REDUCERS
INSTALLATION
The Fox Float X shock allows you to modify the air cham-
ber volume to achieve a different progressivity depending
WITH 0.3 REDUCER
WITH 0.4 REDUCER
1. To install or remove the air cham-
completely the shock´s air cham-
ber FOX FLOAT X
3.
Maximum reducers
from the shock´s shaft and install
volume
facing up) or leave the shock wi-
-
NO REDUCER MORE LINEAR BEHAVIOR
MORE PROGRESSIVITY
MORE PROGRESSIVITY
2. Unscrew the air chamber sleeve from the shock´s head and slide the sleeve
4. Slide air chamber sleeve towards
the shock´s head and screw the
Fox Float X volume reducer compatibility guide:
The guide above shows the installation of
The installation method on Fox Float X is
ORBEA | 109
EN
LIGHT RIDER
LESS AGRESSIVE RIDING STYLE
MID-WEIGHT RIDER
MEDIUM RIDING STYLE
HEAVIER RIDER
AGRESSIVE RIDING STYLE
5.