Tabla de contenido
Idiomas disponibles
Idiomas disponibles
106 | ORBEA
MARZOCCHI AND FOX FORKS
SUGGESTED COMPRESSION SETTINGS
Fox recommends to start with neutral high speed and low
speed compression settings and then adjust the high and
low speed compression dial depending on the riding style
MARZOCCHI BOMBER Z2 COMPRESSION
ADJUSTMENT
Marzocchi recommends to start in the Open position
and then use the other position depending on the terrain
The positions in between Open and Firm can be used to
FOX 34 FLOAT FIT4 COMPRESSION ADJUSTMENT
changes in terrain, and is intended to be adjusted throu-
descending, the MEDIUM mode for undulating terrain, and
OPEN MODE ADJUST:
Open mode adjust is useful to control fork performance
FOX recommends beginning with the Open mode adjust
set to 18 clicks out (counter-clockwise) from fully closed
TECHNICAL MANUAL
FOX 36 GRIP COMPRESSION ADJUSTMENT
-
ges in terrain, and is intended to be adjusted throughout
to the middle detent position sets the fork in the Medium
FOX recommends beginning with the 3-position lever in
The positions between the Open, Medium, and Firm mo-
FOX 36 GRIP2 COMPRESSION ADJUSTMENT
Fox recommends to start with neutral high speed and low
speed compression settings and then adjust the high and
-
low speed compression dial depending on the riding style
Turn the compression dials to the fully closed position
HIGH SPEED COMPRESSION
5 clicks
SUGGESTED SETTING (HSC)
-
LOW SPEED COMPRESSION
10 clicks
SUGGESTED SETTING (LSC)
B LUE PAP ER R I SE · H YD R O 2022
F OX S H OC KS
A DJ UST M E N TS
MANUFACTURER´S MANUALS
-
-
FOX FLOAT DPS AND FLOAT X SHOCKS MANUAL:
FOX FLOAT DPS AND FLOAT X SHOCKS
AIR PRESSURE RECOMMENDATIONS
values may change depending of riding style and terrain
conditions:
RECOMMENDED SAG MEASUREMENT
SAG 25% on 210x55 shock.
Equivalence in mm
SAG 30% on 210x55 shock.
Equivalence in mm
Adjust the shock´s air pressure until the desired SAG is
Once the desired SAG is achieved, adjust the Rebound
-
25% - 30%
You can use the integrated SAG measurement on the
linkage preload tool to measure a 30% SAG.
13.75 mm
16.5 mm
-
ORBEA | 107
E N
Capítulos
Tabla de contenido
