Connection Of Sc-E7000 Display Assemblies; Orbea Rs Battery In Etube Professional; Connection Of Lights To The Ep8 Rs System; Important - Orbea BLUE PAPER RISE Manual Tecnico

100 | ORBEA
CONNECTION OF SC-E7000
DISPLAY ASSEMBLIES
To connect models using the SC-E7000 display, it is pos-
sible to use one of the free display connectors to directly
SC-E7000
ORBEA RS BATTERY
IN ETUBE PROFESSIONAL
The Orbea RS battery is visible in Etube Professional when
connecting the Rise EP8 RS system using the Shimano
With the PCE02 tool you can also access releveant infor-
mation about the battery in the Maintenance tab, like the
TECHNICAL MANUAL
Shimano EW-SD50
PC-Link cable
Shimano SM-PCE02
The Orbea RS 540Wh internal battery is not
there is a problem in the Rise H electric sys-
tem, use Etube Professional to rule out that
the problem does not come from other of the
Contact Shimano to provide them with a
informs you that the problem comes from
the internal battery, contact Orbea through a
B LUE PAPER RIS E · HYDRO 2022
CONNECTION OF LIGHTS
TO THE EP8 RS SYSTEM
Rise is not designed to allow for the con-
the user and/or the Shimano dealer that
decide to install lights to the EP8 motor on
Rise are responsible for the results of this
IMPORTANT: Installing ligths to the EP8
motor can considerably reduce the avail-
able range.
IMPORTANT: The cable managing solutions
on Rise are not designed or tested to allow
for an extra cable to be run through the
frame ports. Damages to the components
derived from installing extra cables on
Rise are not covered by the warranty con-
ditions. Only the user and/or the Shimano
dealer that decide to install lights to the
EP8 motor on Rise are responsible for
the results of this installation.
The Shimano EP8 motor allows for the con-
nection of lights to the dedicated connector
ORBEA | 101
EN
Rise leaves Orbea with the light connector
dealer can activate these connectors using
the SM-PCE02 interface to connect the elec-
It is possible to choose whether the lights will
activate on as soon as the system is turned
on or that the user turns them on through the
It is not possible to turn the lights on only us-
models without a display should be activated
IMPORTANT: Laws in some countries may
make compulsory that an ebike automati-
cally reserves a certain percentage of the
battery charge to power the lights for a
given ammount of time when the battery
has a low remaining charge, disabling the
motor assist to power only the lights. Al-
ways follow the laws of the territory you
are using your bike at.