Connecting The Harness Cable To The Internal Battery; Cable Routing Inside The Frame Motor Housing And Harness Cable And Power Button Removal - Orbea BLUE PAPER RISE Manual Tecnico

74 | ORBEA
CONNECTING THE HARNESS CABLE
TO THE INTERNAL BATTERY
To connect the RS harness cable to the internal battery,
make sure that the connector pins and tab are posi-
tioned in the correct position and match those of the
Once the cable and battery connectors make contact, turn
the cable locking ring counter-clockwise and press the ca-
When the connection is positive, release the cable locking
TECHNICAL MANUAL
If the locking ring does not return to its original position
Consult the internal battery removal and installation meth-
-
B LUE PAP ER R I SE · HYDRO 2022
CABLE ROUTING INSIDE THE FRAME
MOTOR HOUSING AND HARNESS CABLE
AND POWER BUTTON REMOVAL
The internal battery connection cable must be guided on
To replace the harness cable or the On/Off power button
Read the section on how to remove the internal battery to
know how to remove the motor from the frame to access
the harness cable and the On/Off power button
ORBEA | 75
E N