Tractel Longe EN 354 Manual De Empleo Y De Mantenimiento página 12

manufacturer's examination procedures as laid down in the
fi le "Verifi cation procedures for TRACTEL
Verifi cation of the legibility of the marking on the product is
an integral part of the periodical inspection.
Following the periodical inspection, a certifi cate of return
GB
to service must issued by the approved and competent
technician who performed the periodical inspection. This
return to service must be recorded on the inspection
sheet in the middle of this manual. This inspection sheet
should be retained throughout the life of the product until
it is scrapped.
After arresting a fall, this textile product must be dismantled
and destroyed, even if there is no visible alteration.
The Tractel textile EPI such as harnesses, lanyards,
®
ropes and absorbers, Tractel
stopcable™ and stopfor™ fall arresters, the automatic
retraction blocfor™ fall arresters and Tractel
be used provided that from the date of manufacture they
are subject:
- to normal use in accordance with the recommendations
of use in this manual.
- a periodical inspection which must be accomplished
at least once a year by an approved and competent
technician. At the end of this periodical inspection, the
PPE must be certifi ed fi t to return to service, in writing.
- strict compliance with the storage and transport
conditions specifi ed in these instructions.
When disposing of the product, it is mandatory to recycle
the various components after sorting metallic materials
and sorting synthetic materials. These materials should
be recycled to specialised centres. During disposal,
dismantling to separate components should be achieved
by a duly trained person.
12
PPE".
®
13. Lifespan 13. Lifespan
mechanical EPI, like the
®
lifelines can
®
14. Disposal 14. Disposal