Program Structure; Control/Display Panel; Overview Of Leds; Control Buttons - Sicam SBM 55 NW Manual Original

7. Program structure
i
After the SBM 55 NW is switched on, the software
version appears in the control/display panel for
several seconds. After this, both displays show the
value 0.
7.1

Control/display panel

7.1.1

Overview of LEDs

Fig. 9: LEDs on control/display panel
Item Description
1 Displays the active (selected) balancing program and
balancing positions (see sections 8.2).
2 Indication of external weight balancing point; it lights-up
green when the balancing position is reached.
3 Displays the Split program and Match program, lights up
when programs are active (see sections 8.6.3 and 9).
4 Displays the unit of measurement for the rim width and
rim diameter,
lit = mm,
not lit = inch.
5 Displays the balancing program,
lights up when Pax program is selected.
6 Displays the Match program, lights up when Match
program is active.
7 Displays the direction of rotation to reach the balancing
position,
top = turn clockwise,
bottom = turn anti-clockwise.
8 Indication of internal weight balancing point; it lights-up
green when the balancing position is reached.
9 Internal weight display.
10 External weight display.
Sicam srl società unipersonale
651076-34_Im
Program structure | SBM 55 NW | 41
7.1.2

Control buttons

1b
5 4
Fig. 10: Buttons on the control/display panel
Item Button Description
1a <-> Changes the rim diameter
1b 'or Changes the rim width values.
1c <+> Changes the rim distance,
2 <SPLIT> Opens and closes the program for splitting
the balancing weights.
3 <mm/ If LED is on it indicates the measurement
inch> unit is in mm; vice-versa, it is in inch.
4 <MODE> Selects the balancing program
5 <MENU> Performs basic settings.
6 <START> Starts measurement.
7 <STOP> Stops measurement, locks the SBM 55 NW in
case of emergency.
Tab. 1: Function of control buttons
1c 7
6
|
1 695 656 076 2012-03-28
en
1a
2
3