Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Sicam SBM 55 NW Manual Original

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning KEY WORD – Nature and source of hazard!
symbol Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Signal Probability of
word occurrence
DANGER
Immediate impend-
ing danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Sym- Designation Explanation
bol
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on comple-
"
tion of the instruction.
Sicam srl società unipersonale
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | SBM 55 NW | 31
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible!
1.2.1

Product information

Identification plate
Machine model, 10 digit identification code; Voltage
(V), Timing (Hz), Installed power (kW); Amperage (A),
Max. working pressure (kPa), Class of protection (IP);
Year of manufacture; CE Marking; 14 Digit code and
machine model; Bar code.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Hexagonal rod strike
¶
Indicates the point of reading the distance
on the millimetric rod.
GOST Marking
¶
Certifies machine conformity for the Russi-
an market.
Direction of wheel rotation
Wheel must turn in direction indicated.
(see chapter 4.5)
Power supply voltage
¶
Follow the indications given on the plate.
Balancing Start-Stop
¶
Located on the wheel protection indicates the direc-
tion to activate/stop the flange rotation.
en
|
1 695 656 076 2012-03-28