• Check that the sides of the housing are
not concave.
If the sides are indeed concave, introduce
struts before securing the housing to the hull.
• Now tack the housing to the hull with a
quick-drying filler.
n
ote
Only definitively secure housing with epoxy
and fibreglass mat after the hatch has been
fitted.
• Adjust the bolts 'B' .
The clearance between the head of the
bolts 'B' and the supporting surfaces must
be 0.5 mm (
1
/
").
64
• Check the adjustment of the actuator.
n
ote
With the plunger of the actuator fully extend-
ed the corner 'P' must be minimal 3 mm (
higher than the inside of the ship's hull.
vetus® Installation instructions Retractable Thrusters
0,5 mm
B
1
/
")
8
P
ENGLISH
0,5 mm
B
min. 3 mm
P
35
020584.01