• Disconnect the wiring to the shearpin.
Now remove temporarily the safety clip
(hairpin spring) and shear pin.
The tunnel can now freely move up and
down.
n
ote
First after checking whether the tunnel can
freely move up and down and fitting the
hatch, the shear pin and the safety clips must
be refitted.
• Replace the housing.
Ensure that the interior of the housing must
not sit beyond the opening in the hull further
than 15 mm (
5
/
").
8
Make sure the housing lies athwart centered,
so that the free space is equal on both sides
of the tunnel.
• Check that the tunnel can freely move up
and down, and that it remains free from
the hull when fully folded out.
34
020584.01
Max. 15 mm (
X
X
1
5
/
")
8
X
X
vetus® Installation instructions Retractable Thrusters
2