Maxon 298905-01 Manual Del Usuario página 7

LIFT CORPORATION Sht. 7 of 58 DSG#
Never route an energized wire. Make sure the vehicle battery is disconnected.
Always route electrical wires clear of moving parts, brake lines, sharp edges,
and exhaust systems. Avoid making sharp bends in wiring. Attach securely. If
drilling is necessary, fi rst check behind the drilling surface to prevent damage
to any fuel lines, vent lines, brake lines, or wires.
NOTE: Use plastic loom and ties (Kit items) to secure wire extensions and protect
wire along the wire route.
Run the RED/WHITE wire extension along
1.
the trailer chassis from the rocker switch to
pump box on liftgate (FIG. 7-1).
2. Remove pump cover as
shown in FIG. 7-2.
© MAXON Lift Corp. 2020
GPSLRT KIT INSTALLATION
CAUTION
PUMP
BOX
RUNNING RED & WHITE WIRE TO PUMP (GPSLRT)
M-19-05
RED/WHITE
WIRE
FIG. 7-1
REMOVING PUMP COVER
Rev. A Date: 10/14/20
ROCKER
SWITCH
FIG. 7-2