LIFT CORPORATION Sht. 5 of 58 DSG#
NOTE: The RED (+) wire (P/N 908293-240), RED/WHITE wire (P/N 908292-720),
and BLACK (-) wire (P/N 908294-240) serve as wiring extentions to be routed
along the vehicle frame. Make sure the RED (+) wire is long enough to reach
truck battery (+) terminal without putting strain on the wire. Make sure the
RED/WHITE wire is long enough to reach Liftgate pump box without putting
strain on the wire. Make sure the BLACK (-) wire is long enough to reach
truck battery (-) terminal or dedicated vehicle frame ground without putting
strain on the wire. Maintain enough slack on both wire ends to prevent strain
on the connections.
NOTE: The RED/WHITE wire connection, for the GPSLRT installation kit, remains
disconnected until wire is run from pump box on liftgate to cab switch in the
vehicle. See kit installation instructions for GPSLRT.
5. Crimp the female bullet (Kit item) on the
end of the RED (+) wire extension. Next,
crimp the male bullet (Kit item) on the end
of the RED/WHITE wire extension. Then,
crimp the female quick disconnect (Kit item)
on the end of the BLACK (-) wire extension
(FIGS. 5-1 and 6-1).
6. Place one piece of red heatshrink tubing (Kit
item, P/N 093235-08) on the short RED wire
and short RED/WHITE wire (FIGS. 5-2 and
6-1). Next, place the black heatshrink tubing
(Kit item, P/N 268041-03) on the short black
wire.
7. Connect the male bullet of the RED (+)
wire with the female bullet of the RED
(+) wire extension. Next, connect
the female bullet of the RED/WHITE
wire with the male bullet of the RED/
WHITE wire extension. Then, con-
nect the male quick disconnect of
the BLACK (-) wire with the female
quick disconnect of the BLACK (-)
wire extension (FIGS. 5-2 and 6-1).
8. Center heatshrink tubing over mated
connectors on the RED wire, RED/
WHITE wire, and BLACK wire
(FIGS. 5-2 and 6-1). Heat the tubing
enough to shrink the tubing and seal
each connection.
© MAXON Lift Corp. 2020
M-19-05
FEMALE
BULLET
MALE
BULLET
INSTALLING BULLETS &
FEMALE DISCONNECT
FEMALE
RED (+)
BULLET
WIRE
ROCKER SWITCH
RED/WHITE
WIRING SLEEVE
BLACK (-)
WIRE
CONNECTING WIRES
Rev. A Date: 10/14/20
RED (+)
WIRE
FEMALE
QUICK DISCONNECT
FIG. 5-1
RED
TUBING
MALE
FEMALE
BULLET
BULLET
WIRE
BLACK-
DISCONNECT
TUBING
MALE
QUICK DISCONNECT
FIG. 5-2
RED/
WHITE
WIRE
BLACK (-)
WIRE
MALE
BULLET
FEMALE
QUICK