Maxon 298905-01 Manual Del Usuario página 15

LIFT CORPORATION Sht. 15 of 58 DSG#
NOTE: Some pump assemblies are equipped with a MAX ECU arc-suppression
module. Step 5 has instructions for disconnecting fuse holder from the MAX
ECU module.
4. Disconnect fuse holder from start-
er solenoid terminal and male bul-
let on the green wire (FIGS. 15-1
and 15-2). Discard fuse holder.
Then, reinstall hex nut on starter
solenoid terminal. Torque hex nut
to 30-35 lb-in maximum.
© MAXON Lift Corp. 2020
GREEN WIRE
MALE BULLET
REMOVING FUSE HOLDER (GPT)
FUSE HOLDER
STARTER
SWITCH
REMOVING FUSE HOLDER
(GPTLR, MXT & TE-33)
M-19-05
Rev. A Date: 10/14/20
SOLENOID TERMINAL
FUSE HOLDER
FIG. 15-1
MALE BULLET
GREEN WIRE
FIG. 15-2
STARTER SWITCH
STARTER
STARTER
SWITCH
TERMINAL