Preparing For Installation - Maxon 298905-01 Manual Del Usuario

LIFT CORPORATION Sht. 3 of 58 DSG#
To prevent accidental personal injury and equipment damage, disconnect
(-) battery cable and (+) cable from battery.
1. Disconnect power to the pump by
disconnecting negative (-) and positive
(+) cables from battery (FIG. 3-1). Re-
install nuts on negative (-) and positive
(+) battery terminals.
2. Locate accessible place for rocker
switch (Kit item) on dash panel in
vehicle cab (FIG. 3-2). Mark and
drill 13/16" mounting hole in the
dash panel for the switch.
© MAXON Lift Corp. 2020

PREPARING FOR INSTALLATION

WARNING
!
NEGATIVE (-)
BATTERY CABLE
M-19-05
NUT
BATTERY POST
DISCONNECTING BATTERY POWER
FIG. 3-1
CAB
ROCKER SWITCH IN VEHICLE CAB
FIG. 3-2
Rev. A Date: 10/14/20
POSITIVE (+)
BATTERY CABLE
POSITIVE (+)
BATTERY POST
NEGATIVE (-)
ROCKER
SWITCH