Maxon 298905-01 Manual Del Usuario página 12

LIFT CORPORATION Sht. 12 of 58 DSG#
Never route an energized wire. Make sure the vehicle battery is disconnected.
Always route electrical wires clear of moving parts, brake lines, sharp edges,
and exhaust systems. Avoid making sharp bends in wiring. Attach securely. If
drilling is necessary, fi rst check behind the drilling surface to prevent damage
to any fuel lines, vent lines, brake lines, or wires.
NOTE: Use plastic loom and ties (Kit items) to secure wire extensions and protect
wire along the wire route.
Run the RED/WHITE wire exten-
1.
sion along the vehicle frame from
the rocker switch to Liftgate pump
assembly (FIGS. 12-1 and 12-2).
© MAXON Lift Corp. 2020
TUK-A-WAY KIT INSTALLATION
CAUTION
ROUTING RED & WHITE WIRE TO PUMP
FASTENING RED & WHITE WIRE TO VEHICLE FRAME
M-19-05
Rev. A Date: 10/14/20
FIG. 12-1
FIG. 12-2