Maxon 298905-01 Manual Del Usuario página 25

LIFT CORPORATION Sht. 25 of 58 DSG#
4. Place one piece of red heatshrink tubing
(Kit item, P/N 093235-08) on the short RED/
WHITE wire (FIG. 24-2). Then, connect the
male bullet on 14 AWG RED wire to female
bullet on the RED/WHITE wire of the switch.
5. Center heatshrink tubing over mated connec-
tors on the RED wire and RED/WHITE wire
(FIG. 24-2). Heat the tubing enough to shrink
the tubing and seal the connection.
6. In the truck cab, insert the rocker
switch through the 13/16" mounting
hole until switch and on/off plate
are fl ush against the dash panel.
Reinstall nut to secure the switch
and on/off plate to dash panel
(FIG. 25-1).
© MAXON Lift Corp. 2020
ON/OFF
PLATE
ROCKER
SWITCH
DASH
PANEL
REINSTALLING SWITCH ON DASH PANEL
M-19-05
Rev. A Date: 10/14/20
13/16"
HOLE
SWITCH
NUT
FIG. 25-1
WIRES