Maxon 298905-01 Manual Del Usuario página 4

LIFT CORPORATION Sht. 4 of 58 DSG#
3. Unscrew nut from switch. Fit the on/
off plate (Kit item) fl ush against the
base of the switch (FIG. 4-1).
NOTE: Ensure the dash panel
is not thicker than 3/16".
4. In the cab, feed the rocker switch
wires through the 13/16" mounting
hole until switch and on/off plate are
fl ush against the dash panel. Rein-
stall the nut to secure the switch and
on/off plate to dash panel (FIG. 4-2).
© MAXON Lift Corp. 2020
M-19-05
BASE
ROCKER
SWITCH
FITTING ON/OFF PLATE TO SWITCH
ON/OFF
PLATE
ROCKER
SWITCH
DASH
PANEL
MOUNTING SWITCH TO
Rev. A Date: 10/14/20
ON/OFF
PLATE
FIG. 4-1
3/16" MAX
13/16"
HOLE
SWITCH
NUT
DASH PANEL
FIG. 4-2
SWITCH
NUT
WIRES