LIFT CORPORATION Sht. 17 of 58 DSG#
6. Route the RED/WHITE wire
extension and split loom (from
cab switch) through the grom-
met on the pump mounting
plate (FIGS. 17-1 and 17-2).
Next, cut off enough split loom
to get access to the wire. Then
cut the RED/WHITE wire to a
length that prevents strain on
wiring connections.
7. Strip insulation from the RED/
WHITE wire to install female
bullet terminal (Kit item). Then,
crimp the female bullet on the
wire (FIGS. 17-1 and 17-2).
8. Connect the female bullet on
RED/ WHITE wire to male bullet
on the GREEN wire (FIGS. 17-1
and 17-2).
© MAXON Lift Corp. 2020
FEMALE
BULLET
GROMMET
SPLIT LOOM
CONNECTING RED/WHITE WIRE
WITH GREEN WIRE (GPT)
FEMALE
BULLET
RED/WHITE
WIRE
CONNECTING RED/WHITE WIRE WITH GREEN WIRE
(GPTLR, MXT & TE-33)
M-19-05
Rev. A Date: 10/14/20
RED/WHITE
WIRE
FIG. 17-1
MALE
BULLET
FIG. 17-2
GREEN WIRE
MALE
BULLET
GREEN WIRE
GROMMET
SPLIT LOOM