Battery Type - DeWalt DCM575 Traducido De Las Instrucciones Originales

EnGLIsh
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The DCM575 operates on a 54 volt battery pack.
These battery packs may be used: DCB546, DCB547. Refer to
Technical Data for more information.
Package Contents
The package contains:
1 Chainsaw
1 Scabbard
1 Bar 40 cm
1 Chain 40 cm
1 Instruction manual
NO BATTERY OR CHARGER INCLUDED
1 Li-Ion battery pack**
1 Li-Ion battery charger**
**Included with DCM575X1 Only
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Do not leave in rain.
44
WALT batteries with a
e
Tip contact can cause the guide bar to move suddenly
upward and backward, which can cause serious injury.
Contact of the guide bar tip with any object should
be avoided.
Rotational direction of the saw chain.
Always use two hands when operating the chainsaw.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery from
the tool.
Directive 2000/14/EC guaranteed sound power.
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Variable speed trigger switch
1
Lock-off lever
2
Chain brake / front hand guard
3
Guide bar
4
Saw chain
5
Sprocket cover
6
Battery Pack
7
Bar adjust locking knob
8
Chain tensioning knob
9
Oil level indicator
10
Guide bar scabbard
11
Rear handle
12
Front handle
13
Battery housing
14
Battery release button
15
Oil cap (not shown)
16
Intended Use
Your chainsaw has been designed for professional
cutting applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This chainsaw is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
2016 XX XX