T Ec Hn Ic A L In Fo Rmat Ion - Bluewater SPIRIT El Manual Del Propietario

TEC HN I C A L IN FO RM ATION
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system.
Only connect to the cold water supply. The temperature limits
are in the table "Requirements on feed water to water purifier".
For more detailed technical information see www.bluewatergroup.com
Parameter/Model
Size W×D×H [mm (")]
Weight [kg (lbs)]
Power supply, earthed supply
Power supply, earthed supply US
Power (US)
Faucet with water quality indicator
light
Compatible with household
appliances
Requirements on feed water to water purifier
Description
Pressure, flowing/dynamic [kPa (bar)
(psi)]
Water flow [l/min (gal/min)]
TDS (Total disolved solids) [mg/l]
Conductivity at 25°C (77°F) [μS/cm]
Temperature [°C (°F)]
Hardness [°dH (grains/gallon)]
Iron Fe /Fe [mg/l]
(II) (III)
Turbidity [FNU]
Owner's manual
Spirit 300
150×365×462 (5.9×14.3×18.2) 150×365×462 (5.9×14.3×18.2)
15 (33)
220-240 V 50/60 Hz, 10A
120V 60Hz, 10A
350W (3Amps)

N/A
Spirit 300
150 –1000 (1.5 –10)
(22 –145)
> 6 (1.6)
< 1200
< 1600
2–35 (36–95)
< 10 (< 10.4)
< 0.5/< 0.3
< 0.5
12
Spirit 300Cp
15 (33)
220-240 V 50/60 Hz, 10A
120V 60Hz, 10A
350W (3Amps)
N/A

Spirit 300Cp
150 –1000 (1.5 –10)
(22–145)
> 6 (1.6)
< 1200
< 1600
2–35 (36–95)
< 10 (< 10.4)
< 0.5/< 0.3
< 0.5