Prior To First Use - Redmond RMC-M90E Manual Del Usuario

5. "Min" button is used to adjust the minutes in time setting Time Delay modes.
6. "Quick Cook" button starts "QUICK COOK" program.
7. "Menu/Keep Warm" button is used to select an automatic cooking
program and to disable the Keep Warm function in advance.
8. "Start" button starts the cooking program.
9. Display.
Display A3
1. "QUICK COOK" program indicator
2. Operating program/Reheat function indicator
3. Cooking stage indicator
4. "MULTICOOK" temperature indicator
5. "Time Delay" indicator
6. Indicator of the timer operation
7. Timer
8. Selected program indicator
I. PRIOR TO FIRST USE
Carefully unpack the device, remove all packaging materials and stickers
except the one with the unit's serial number. The absence of the serial
number will deprive you of your warranty benefits. Wipe all interior and
exterior surfaces of the unit with a soft, damp cloth. Wash the bowl with
warm soapy water. Rinse and dry thoroughly. Odor on first use of the appli-
ance is normal. In such case, clean the device.
Caution! Do not use the appliance in case of any malfunctions.
II. OPERATION
Before Use
Place the device on a flat, stable, and hard surface away from any objects or
cabinets that could be damaged by steam, humidity, or high temperatures.
Before operating, make sure that the outer and inner parts of the multi-
cooker have no dents, cracks or any other visible damages. There should not
be any obstructions between the heating element and the bowl.
Setting The Cooking Time
Multicooker REDMOND RMC-M90E allows manually adjusting the cooking
time, set by default for each program (except "QUICK COOK"). Time adjustment
range and interval depend on the program of cooking selected. To set:
1. Select the cooking program. Press "Hour" button repeatedly to adjust
the hours. Hold the button down to scroll through the digits.
2. Press "Min" button repeatedly to adjust the minutes. Hold the button
down to scroll through the digits.
3. To set the cooking time of less than 1 hour press "Hour" button repeat-
edly to reset to zero. Adjust the minutes using "Min" button.
4. When the time is set (display keeps blinking) proceed to the next
stage in accordance with the program selected. To cancel all settings,
press "Reheat/Cancel" button and reset.
Manually adjusting the cooking time, consider time adjustment range and
interval of selected program, given in the table of default settings.
For your convenience the cooking time range in all programs starts with
the minimum setting, enabling you to prolong the operating time of the
program, if the dish is undercooked.
In certain automatic programs countdown starts only when the device
reaches its operating temperature. E.g. If you set "STEAM" program on 5
minutes, the countdown of the program begins only when the water comes
to a full boil providing enough steam. In "PASTA" program, the countdown
begins after water starts boiling and "Start" button is being repressed.
8
Time Delay Function
This function allows setting the program to finish by certain time. Cooking
time may be delayed for a period from 10 minutes to 24 hours with 10
minute intervals. Setting Time Delay function, take the cooking time of the
program into consideration. The time of a delay should be longer than the
cooking time of the program selected; otherwise the program starts running
right after you press "Start".
When the automatic program is selected and the temperature and cooking
time are adjusted, you may set the "Time Delay".
1. Press "Time Delay" button to enter the Time Delay setting mode. The
words Time Delay are displayed. Timer is blinking.
2. Press "Hour" button repeatedly to adjust the hours in 24 hour format.
Hold the button down to scroll through the digits.
3. Press "Min" button repeatedly to adjust the minutes. Hold the button
down to scroll through the digits.
4. If you need to set the delay of less than 1 hour, repeatedly press "Hour"
button to reset to zero and adjust the minutes using "Min" button.
5. To cancel the settings press "Reheat/Cancel" button and reset.
6. When the time is set press and hold down the "Start" button. Time
Delay function indicator lights up. Set program starts running and the
countdown begins.
7. Your meal will be ready when the time set expires. When the program
finishes, the device automatically switches to "Keep Warm" ("Reheat/
Cancel" button indicator lights up).
8. Press "Reheat/Cancel" button to cancel the "Keep Warm". Button indi-
cator goes off.
Time Delay function is available in all automatic programs except "FRY",
"PASTA" and "QUICK COOK".
It is not recommended to use Time Delay function if dairy and other perish-
able products are being used (eggs, fresh milk, meat, cheese etc.).
Setting the "Time Delay" in "STEAM" program remember that the countdown starts
only when the device reaches its operating temperature (water comes to a full boil).
Keep Warm Function
Function is being automatically activated at the end of the cooking program.
When the program finishes, the temperature of the meal (70–75°C) is being
maintained for a period of time up to 24 hours. "Reheat/Cancel" button in-
dicator lights up and the "Keep Warm" count up is being displayed. Press and
hold down "Reheat/Cancel" button to disable the function.
Disabling The "Keep Warm" In Advance
Automatic activation of the Keep Warm function at the end of the program may
sometimes be undesirable. REDMOND RMC-M90E allows disabling the function
in advance, while setting the program or during its operation. Press and hold
down the "Menu/Keep Warm" button to cancel the function. "Reheat/Cancel"
button indicator goes off. To reactivate the function, repress and hold down the
"Menu/Keep Warm" button ("Reheat/Cancel" button indicator goes off).
Reheat Function
REDMOND RMC-M90E can be used for warming up cold meals. To reheat:
• Put the products into the bowl. Place the bowl inside the device.
• Close the lid until it clicks into place and plug in the unit.
• Press and hold down "Reheat/Cancel" button for a few seconds until
an audible sound is produced. Corresponding indicators light up and
"reheating" process begins. The timer starts its countdown.
The meal will be warmed up to 70–75°C and the temperature will be
maintained for the next 24 hours. To cancel the function press and hold
down "Reheat/Cancel" button. Corresponding indicators go off.
The function may operate for a period of 24 hours, however, we recommend
using it moderately, because a prolonged thermal exposure may sometimes
affect flavor characteristics of the meal.
Standard Operating Procedure for Automatic Programs
1. Measure the ingredients according to the recipe.
2. Put them into the bowl. Make sure that all the ingredients including liquid
are below the scale mark indicating maximum capacity. Place the bowl
inside the device. The bowl and the heating element must fit tightly.
3. Close the lid until it clicks into place. Plug in the unit.
4. Repeatedly press "Menu/Keep Warm" button to select the program
(corresponding indicator lights up).
5. Use "Hour" and "Min" buttons to adjust the time set by default for each
program.
6. Set Time Delay function if needed. Time Delay function is not available
in "FRY", "PASTA" and "QUICK COOK" programs.
7. Press and hold down "Start" button. "Start" and "Reheat/Cancel" button
indicators light up. Set program starts running and the countdown begins.
Countdown of the "STEAM" program begins only when water comes to
a full boil, providing enough steam. In "PASTA" — after water comes to a
full boil, products are added and "Start" button is being repressed.
8. Press and hold down "Menu/Keep Warm" button to disable the Keep Warm
function in advance if needed ("Reheat/Cancel" button indicator goes off).
Repress "Menu/Keep Warm" button to reactivate the function. Keep Warm
function is not available in "YOGURT/DOUGH" and "BREAD" programs.
9. When cooking time expires, the device makes an audible sound. De-
pending on your settings the unit either switches to "Keep Warm"
("Reheat/Cancel" button indicator lights up) or enters standby mode
("Start" button indicator blinks).
10. To interrupt cooking process at any stage, to cancel set program or
the Keep Warm function press and hold down "Reheat/Cancel" button.
To achieve better cooking results, we recommend consulting the cookbook
provided. Each out of 100 recipes has been adjusted for this particular model.
If you did not achieve the desired result using automatic programs, try
versatile program called "MULTICOOK", featuring a wide time and tem-
perature adjustment range. This program gives endless opportunities for
new culinary experiments.
"MULTICOOK" Program
This program can be used to cook any meal with your personal time and tem-
perature settings. REDMOND RMC-M90E, featuring "MULTICOOK" program will
be able to replace a big number of kitchen appliances. Now any recipe, either
from your family cookbook or Internet, can be adjusted for your multicooker.
For your convenience, the device does not switch to "Keep Warm" auto-
matically by the end of the program if the cooking temperature was less
than 80°C. It may be manually reactivated by pressing and holding down
the "Menu/Keep Warm" button right after the program starts running. "Reheat/
Cancel" button indicator lights up.
• Program's default temperature is 100°C, default time is 15 minutes.
• Temperature adjustment range (use "Temperature" button to adjust)
is from 35°C to 170°C with 5°C intervals.
• Cooking time adjustment range is from 5 minutes to 12 hours with
the following intervals: less than 1 hour — 1 minute, over an hour — 5
minutes.
A big number of various dishes can be prepared with the help of "MULTI-
COOK". Follow recommendations of our chefs given in the recipe book and
the table of recommended temperature settings.