Types Of Work; Switching Off; Care And Maintenance - Hilti SID 8-A22 Manual De Instrucciones

6

Types of work

ATTENTION
Risk of damage by incorrect handling!
▶ Do not operate the switches for direction of rotation and/or function selection during operation.
Observe the safety instructions and warnings in this documentation and on the product.
6.1 Setting forward or reverse rotation
In the middle position, the forward / reverse selector switch serves as a safety lock.
▶ Set the forward / reverse selector switch to forward or reverse rotation.
6.2 Switching on
▶ Press the control switch.
➥ Speed of rotation is regulated by the distance the control switch is pressed in.
6.3 Screwdriving
CAUTION
Risk of injury by damaged workpieces! Screws or workpiece can be damaged if torque is too high. This
presents a risk of injury.
▶ Make sure that screws and workpiece are suitable for the torque produced by the tool.
▶ Set the forward/reverse switch to the desired direction of rotation.
➥ Be sure to use the correct adapter.
6.4

Switching off

▶ Release the control switch.
6.5 Removing the accessory tool
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Pull the chuck ring forward and hold it in this position.
3. Pull the bit out of the chuck and let go of the ring.
7

Care and maintenance

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
*2095035*
Printed: 14.10.2019 | Doc-Nr: PUB / 5230112 / 000 / 02
5
4
2095035 English 19