Wall Mount Installation - GE 29391 Manual Del Usuario

W M
ALL OUNT
1. Carefully turn the phone over. Detach the wall mount bracket from the
two sets of top grooves by pressing the tabs in. Pull the bracket from
the phone and turn it around so that it looks like the diagram below.
Gently press the bracket into the two sets of bottom grooves until it
snaps into place.
2. Plug the short line cord into the jack on the back of the base.
3. Feed the line cord through the grooves provided so that the base area is
flat and ready to mount on the wall.
4. Connect the other end of the line cord into the wall phone jack.
5. Place the handset in the cradle of the base as soon as possible to hang
up the phone.
6. Plug the coiled cord into the handset. Plug the other end into the jack on
the side of the base.
7. Slip the mounting holes of the base (on bottom of unit) over the wall
plate posts and slide the base down until the phone is firmly in place.
8. Set the RINGER switch on the base to the desired loudness.
• HI = Default, loudest sound.
• LO = Sound will be lower.
• OFF = Telephone will not ring.
I
NSTALLATION
8
2
3
6
4
1
7
9