Intersurgical i-view Manual Del Usuario página 5

en
Using the i-view
• Turn on the device by pressing the on/off button (fig 1).
• The distal tip of the blade of the device should be inserted into the patient's mouth under direct vision (fig 2)
and the blade gently advanced down the tongue until the epiglottis has been identified (fig 3). The tip of the
blade should then be advanced into the vallecula (fig 4).
• With minimal force, indirectly lift the epiglottis with the i-view until the glottis comes into view. This can be
achieved using a direct or indirect view (fig 5). If deemed necessary, bimanual laryngoscopy and/or head
elevation can be used to improve the view.
• Once the glottis has been identified, an appropriately sized tracheal tube can be passed through the vocal
cords to the required depth (fig 6) and the i-view gently removed (fig 7).
• Confirmation of correct placement of the tracheal tube should be assessed by the use of wave form capnography
and other methods in accordance with applicable guidelines.
• i-view should then be switched off by depressing the on/off switch (fig 8).
Storage Conditions
Store in a dry place out of direct sunlight. Products should be stored between -18 °C - +40 °C.
Disposal
• Should be disposed of in accordance with normal procedures for clinical waste.
• Please contact your local authority or Intersurgical for more information.
Specification
Size
Weight
Minimum Interdental Gap
Electrical Rating:
Applicable Standards
EN 60601-1:2006 + A11:2011
EN 60601-1-6:2010
EN 62366:2008
EN 60601-1-12:2014
200 mm x 162 mm x 70 mm
0.138 kg
16 mm
4.5V DC 150mA
5