Sagi XE70 Instrucciones Originales - Manual De Uso E Instalación página 148

Use the up and down buttons to set the numerical value corresponding to
the month of the year.
Confirm the value with the on/sby/enter button.
The display will show the string [nn] again in steady mode.
Use the up button to select the string [yy].
Press the on/sby/enter button to enter into setting mode.
Use the up and down buttons to set the numerical value corresponding to
the last 2 digits of the current year.
Confirm the value with the on/sby/enter button.
The display will show the string [yy] again in steady mode.
Use the up button to select the string [hh].
Press the on/sby/enter button to enter into setting mode.
Use the up and down buttons to set the numerical value corresponding to
the current hour.
Confirm the value with the on/sby/enter button.
The display will show the string [hh] again in steady mode.
Use the up button to select the string [nn].
Press the on/sby/enter button to enter into setting mode.
Use the up and down buttons to set the numerical value corresponding to
the current minutes.
Confirm the value with the on/sby/enter button.
The display will show the string [nn] again in steady mode, then it will exit
automatically from configuration.
The output is signalled by 3 short consecutive beeps and by the
temporary appearance on the display of the label [ESC].
You can leave the programming phase by waiting for 30 seconds without operating on the
card, or pressing
In both cases, there you will hear 3 consecutive, short beeps and the display will
temporarily show [ESC].
for 5 seconds.
24