Thermo Scientific ThermoFlex Manual De Instrucciones página 190

Set Special Command
Used for product specific commands, in the ThermoFlex this command configures the analog options (DAC out, Analog in and turns on and off DAC
output)
CA 00 01 8D nn d1...dn cs
Set Special Command
Byte
d1 Command Byte
d2 Description Byte
d3 Entered Value if necessary
Command Byte
Command
00
01
02
Description Byte
Byte
b.7 - b.6
b.5 and b.4
b.3 - b.2
b.1 - b.2
The following command string example enables the DAC output, configures the DAC for millivolts and configures the analog input for voltage:
CA 00 01 8D 02 00 14 cs
Thermo Scientific Thermo Scientific
Notes
Indicates what command
See description below
Description
Set Analog Option
Set Resistivity Control (for basic derivatives)
Unused
Notes
Unused
Remote DAC output enable
Configure DAC Output
Configure Analog Input
00 = Off, 01 = On, 1x = No Change
00h = Volt, 01h = millivolt, 02h = milliamp, 03h = No Change
00h = Volt, 01h = millivolt, 02h = milliamp, 03h = No Change
Appendix C
ThermoFlex C-11