Chiller Surface; Hoses - Thermo Scientific ThermoFlex Manual De Instrucciones

Section 6
ThermoFlex7500s - 10000s
For air-cooled chillers, remove the one-piece grill assembly by pulling the
assembly away from the chiller.
Water-cooled chillers do not have a filter.
The filter goes over four studs and plastic "fast nuts" that hold it in place.
Replace it or vacuum the old filter with a soft-bristle brush, or wash it.
Shake off as much of the excess water as possible before reinstalling.
Tuck the filter around the perimeter of the grill and over the four studs,
use the plastic "fast nuts" to hold it in place.
Replacement grills are available from Thermo Fisher.
"fast nut"
Figure 6-4 Filter Removal/Replacement ThermoFlex7500s - 10000s Air-Cooled

Chiller Surface

Clean the chiller's surface with a soft cloth and warm water only.

Hoses

Inspect he chiller's external hoses and clamps on a daily basis.
6-6 ThermoFlex Thermo Scientific