Thermo Scientific ThermoFlex Manual De Instrucciones página 126

SETTINGS
SETTINGS allows you to view/change settings.
Note The controller can only display six lines at a time. Press the up and down arrows to scroll through
and highlight each line.
If a change to a setting is needed, highlight the desired line and then press the enter button. The high-
light will start to flash.
If the text on a line is all capital letters, e.g., UNITS and TEMPERATURE, the setting has a sub-menu.
Pressing enter will bring up the sub-menu. The sub-menus, shown on the following pages, allow you to
view/change the applicable settings.
Lines that are not all capital, e.g., Setpoint and Line Frequency, indicate the changes can be made
directly on the SETTINGS display.
If the line has a box, Auto Restart, pressing enter with that line highlighted will toggle between on or
off. See Auto Restart in this section for precautions and additional details.
Thermo Scientific

SETTINGS
UNITS
Setpoint
TEMPERATURE
PRESSURE
FLUID LEVEL
AUTO REFILL*
FLOW*
Line Frequency*
Auto Restart
Audible Alarms
RA FAN SPEED MODE*
Care Level
SERIAL COMM - DCOM*
ANALOG COMM - ACOM*
RESISTIVITY*
RESTORE DEFAULTS
mm/dd/yy
Show Quick Start
*Only displays on chillers equipped with the option.
xx
60HZ
off
hh:mm:ss
Section 4
ThermoFlex 4-11