Thermo Scientific ThermoFlex Manual De Instrucciones página 82

Cooling
Capacity
Thermo Scientific
BTU/Hr Watts
40000
12000
10000
32000
8000
24000
6000
16000
4000
8000
2000
10
40
• Specifications obtained at sea level using water as the recirculating fluid, at a 20°C process
setpoint, 25°C ambient condition, at nominal operating voltage, on chillers with P 2 pumps with no
back pressure. Other fluids, fluid temperatures, ambient temperatures, altitude, operating voltages or
pumps will affect performance. See Section 3.
• Chillers require the use of 50/50 EG/water or 50/50 PG/water below 10°C process temperature to
prevent freezing/glazing of the plate exchanger.
• Thermo Fisher Scientific reserves the right to change specifications without notice.
A
B
C
D
Operation below 10°C requires the use of
50/50 EG/water or 50/50 PG/water
Operation below 10°C requires the use of
50/50 EG/water or 50/50 PG/water
20 30 40 50
80 120
Temperature Setpoint
A: 10000, 60 Hz
B: 10000, 50 Hz
C: 7500, 60 Hz
D: 7500, 50 Hz
60 70 80 90 °C
160 200 °F
ThermoFlex
Section 2
2-5