Noise Hazard - Pentax EN6A Instrucciones De Uso

• COLLISION HAZARD
Due to the pump parts as high as the user.
• SLIPPING HAZARD
Due to wet or oily areas of the floor.
In order to avoid slipping risk, it is advisable taking individual measures (accident
prevention shoes).
• ELECTRIC SHOCK HAZARD:
It's a particular safety warning reported in a label on the pump electric panel , only
where the risk of electric shock is very high. (Figure 11)
Keep any water flushings, steam jets (of steam washers), solvents or paints off the
pump parts with electrical wires, especially nearby the panel.
Always switch off the pump before any maintenance servicing.
• BREAKDOWN / EXPLOSION HAZARD
Use the pump always in accordance with the performance range reported in the
rating plate.
Be careful with accidental losses: please call in immediately the maintenance
personnel.
While starting up, remember to prime the pump and to open the delivery valve:
Overheating danger.
• HAZARD DUE TO IMPROPER LIGHTING (where applicable)
The user and the maintenance personnel have to check that every part of the pump
is uniformly lit, in accordance with the regulations in force in the country where the
pump is installed.
• HAZARD OF COMPONENT FAILURE DURING OPERATION
Even if the manufacturer utilized suitable materials and followed suitable design/
building procedures for a safe equipment, it is however necessary to comply either
with the use of the set design purpose (pump/motor) or with suggested inspections
and maintenance as per chapter 6 "MAINTENANCE" .
• CRUSH HAZARD
During every step of the handling, assembly and maintenance, always utilize
individual protection equipment, such as gloves, accident prevention shoes and
everything as per the laws in force in the country.

• NOISE HAZARD

The pump or the electropump supplied have noise values which are reported in
chap. 2.
In case the pump is used with another motor, or is installed within the pump room, it
is necessary to check the whole noise level in accordance with the laws in force in the
country.
Be careful with possible anomalous noises while the pump is working.
• HAZARD FOR NOT ALLOWED USAGE
Every pump usage differing from the usage for which the pump was designed, can
be seriously harmful for those who are working near the pump.
It is extremely important to follow carefully all the instructions concerning usage,
maintenance and safety described in this handbook.
• HIGH TEMPERATURE HAZARD
Pump dimensions and protections allow the temperature of mechanical parts to be
within the normative limitations.
Be careful with pump disassembling after its working:
danger of high temperature in some areas of the pump.
SAFETY
8
10
3
Fig.10
OFF ON
1
1)Panel
°C
+40
OK !
+5