Lifting And Handling - Pentax EN6A Instrucciones De Uso

PACKING, LIFTING, HANDLING, SHIPMENT AND UNPACKING ARE
EXCLUSIVELY ENTRUSTED TO EXPERT PERSONNEL WHO KNOWS
BOTH THE PUMP AND THE MANUAL. VERY WELL.
• PACKING
According to their dimensions, pumps are shipped as follows:
– in a wooden crate (either bigger pumps or pumps with motor).
– in cases made of folding plywood.
– in wooden pallets.
ATTENTION!
Dimensions, net and gross weights are reported on the cases.
(see Figure 1)

• LIFTING AND HANDLING

Packed pumps can be lifted and transported by fork lift trucks.
(see Figure 2)
ATTENTION!
The chosen trucks must be suitable for a safe lifting and handling, considering the
dimensions and weights reported on the packing. (see Figure 1)
• STORAGE
Packing must always be kept in covered and protected places with temperatures
between +5°C and +40°C, avoiding direct exposure to the sun rays.
STACKING OF PACKING
The type of packing being utilized permits the possibility of stacking up to 4
cases on top of each other inside the warehouse, thanks to the kind of packing
utilized, provided that they are properly piled and insured against falling.
Inside the truck bodies and in the containers can be stacked up to 5 cases
(except for the pallet), provided that they are well strapped and insured
against falling.
UNPACKING
When the goods arrive, please check if the parts are not damaged during the
transportation and verify every part listed in the delivery note.
Unpack carefully taking all the necessary precautions in order to avoid any damage
to persons or pump parts (during the unpacking, please avoid making fall the parts
from the crate).
PACKING DISPOSAL
The wood of crate or the wood
of pallet can be re-used or
recycled in accordance with the
laws in force in the country
where the pump is installed.
Other materials like strap,
polystyrene and plastic have to
be disposed according to the
laws enforced in the country.
PACKING, SHIPMENT AND STORAGE
°C
+40
+5
4
6
Fig.1
900 mm.
Fig.2
1
MIN.