Information On Overhead Noise; Installation; Handling; Assembly And Dismantling - Pentax IPFC 109 Manual De Instrucciones

4. Information on overhead noise

5.Installation

5.1. Handling

5.2. Assembly and dismantling

In case of fire in the electric equipment, do not use water to put it out.
The units use motor-driven pumps with mechanical parts in motion fully protected
against accidental contacts, by means of suitable sumps. Every responsibility is
declined in case of damages to persons, animals or things caused by the removal of or
tampering with said devices.
The pressurisation unit is an automatic system, therefore the pumps can start without
warning. It is therefore necessary to pay maximum attention before any intervention.
For information on the power and acoustic pressure level, refer to that reported on the
instruction booklet of the pumps.
Do not disperse the packaging materials in the environment, but keep to the
regulations in force on the disposal of waste.
The units are delivered in cardboard packages on appropriate pallets and can therefore
be transported by means of lifting trolley or pallet truck.
It is necessary to verify that the maximum capacity of the hoisting mean is compatible
with the weight of the unit.
In case of handling from above (crane, bridge crane, forklift) it is necessary to hook the
unit by passing suitable belts from underneath the pumps, in front and behind the
fixing points on the base, in order to avoid the possibility of capsizing. Proceed
cautiously to avoid accidental impacts.
The units are delivered fully assembled and do not therefore require any assembly
operation, if not for additional requested accessories.
Verify that the positioning is on a flat and regular surface, act at supporting the
weight of the unit and sufficiently spacious to allow the carrying out of use and
maintenance operations in safe conditions.
8