General Safety Requirements - RS Pro RS HS-608 Manual De Instrucciones

Oscilloscope Section/English
Introduction
Digital Oscilloscope performs outstandingly, powerful, affordable, with a high cost performance.
Its real time sample rate is up to 50 MSa/s, can meet the market needs of high capture speed,
complicated signal; supports internal storage and Bluetooth data transmission.
This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency
(electrical & electronic), Duty Cycle, Diode Test, Insulation Test, and Continuity plus Thermocouple
Temperature. It can store and recall data. It features a waterproof, rugged design for heavy duty
use. Proper use and care of this meter will provide many years of reliable service.
Features
• Brand new design, compact size, simple portability
• TFT color LCD display, waveform display much more clear and stable
• Real time sample rate: 500Sps—50 Msa/s
• Storage depth: 3Kpts
• Trigger function: rising edge, falling edge
• Waveform record
• Auto search
• 10 set waveform storage/output; waveform data can be transmitted by Bluetooth or wireless
USB interface to upper computer for further operation
• Cursor test
• Multi-screen display for channel waveform and FFT waveform
• Menu display mode, much flexible and natural operation for customer
• English online help system
• A user manual
• Product warranty card
• Certificate of quality
• One set of 1:1 probe
• One adaptor
• A charger according with user's country standard
• CD ( pc software)
32 13/08/2017 Version No. 001

General safety requirements

Know the following safety precautions to avoid personal injury, also to prevent damage
generated by connecting this product to any other product. In order to avoid any potential
danger, please use the product according to these instructions.
Only qualified technical personnel can perform maintenance procedures.
Use proper charger. Only use the charger supplied witn this product.
Insert and remove cables correctly. Don't insert or pull out while test leads are connecting
with power
cable.
Connect the probe correctly. Probe ground is the same as earth potential; do not
connect the ground wire to a high voltage. During the test procedure, please don't touch bare
contacts or components.
Check all the terminal ratings. In order to prevent danger of fire and electrical shock, please
check all the ratings and notes of this product.
Before connecting the device, please read the user manual for further information of concerned
ratings.
Don't operate with the cover opened. If the cover-plate or face-plate is removed, please don't
use the device.
Use appropriate fuse. Only the fuse wires which complies with specified type and ratings
of this product can be adopted.
Don't operate while suspecting product malfunction. If suspect any damage of this device,
please inform qualified maintenance personnel to examine.
Avoid circuit exposure. Don't touch any bare contact or component after connection of industrial
frequency power.
Please don't operate in flammable or explosive circumstance.
Keep device surface clean and dry.
13/08/2017 Version No. 001
Oscilloscope Section/English
33