Safety Information - RS Pro ICM 20 Manual De Instrucciones

 Safety Information
For safe operation of this instrument, read
these instructions completely before you
use it and comply with them fully.
Failure to observe these warnings can
result in severe injury or death.
- If possible, do not work alone, so
assistance can be given if required.
- Do not use the instrument if it is damaged.
- Do not use the instrument if it is not
operating correctly, or if it is wet.
- If this instrument is used in a manner not
specified in these Operating Instructions,
the protection provided by the instrument
may be impaired.
- Use extreme caution and wear Personal
Protective Equipment when taking
measurements where Hazardous Live
parts could be Accessible.
- Use caution when measuring or working
near voltages above 30 V ac rms, or
60 V dc. These voltages may cause a
shock.
- Do not allow fingers to protrude beyond
the Tactile Barrier when fitting or removing
the instrument from around a Hazardous
Live conductor, as this may cause a shock.
Symbols as marked on the Tester
and instructions
Caution, Risk of electric shock

Cauton, Risk of danger - Refer to

operating instructions.
Equipment protected throughout by
7
double or reinforced insulation
<
Battery
Earth

Conforms to applicable EU

directives
Application around and removal
from Hazardous Live conductors is
permitted
2