Symbols In The Documentation; Symbols In The Illustrations; Product-Dependent Symbols; Symbols On The Product - Hilti VC 60-W Manual De Instrucciones

CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2

Symbols in the documentation

The following symbols are used in this documentation:
Read the operating instructions before use
Instructions for use and other useful information
1.2.3

Symbols in the illustrations

The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
These characters are intended to specifically draw your attention to certain points when handling
the product.
1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols are used on the product:
Warning: hot surface
Transport by crane is not permissible.
1.4

Product information

Hilti products are designed for professional users and only trained, authorized personnel are permitted to
operate, service and maintain the products. This personnel must be informed of any particular hazards that
may be encountered. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Wet-type vacuum cleaner
Generation
Serial no.
1.5

Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany
12 English
VC 60-W
02
2333433
*2333433*