Leds - MR TAPCON 230 Instructions De Montage

4 Product description
Maschinenfabrik Reinhausen GmbH 2021
7 Front interface
8 ENTER key
9 LEFT cursor
10 RIGHT cursor
11 BACK key
1)
Only possible in manual mode.
2)
Key without function if a digital input is used to toggle between LOCAL/RE-
MOTE.

4.3.2 LEDs

Figure 3: LEDs
1 Power supply LED
2 AVR STATUS LED
3 ALARM LED
4 LED X8 110 V DC output
7820658/01 EN
RJ45 Ethernet interface
Confirm selection/save modified parame-
ters
Navigate to the left in the menu
Navigate to the right in the menu
Exit the current menu. Return to the pre-
vious menu level
1
2
AVR STATUS
3
EVENT
Blue Illuminates when the device is sup-
plied with power.
Red Illuminates when the device is in the
error state.
Yellow Illuminates when the device starts or
has been paused; e.g. during a soft-
ware update.
Blue Illuminates when the device is in the
operating state.
Red Illuminates as soon as a red event is
present.
Yellow Illuminates as soon as a yellow event
is present.
Blue Illuminates if there are no events or a
gray event is present.
Blue Illuminates if the digital inputs are
supplied with voltage.
4
®
TAPCON 230 19