Sima DEL-32 Manual De Instrucciones página 59

If you intend to use the external screen (HMI), make sure that it is placed far enough from the
machine to avoid the user to get tangled with the wires or to hit or break the screen stand by
accident.
Only the operator that will be using the machine may have access to the interface at a time, and
he must check the bending sequence and angle before starting the machine.
Once the user is connected to the App, the following menu will come out to the device screen by default:
Depending on whether the device screen is set horizontal or vertical, press the icon shown below to change the
screen setting.
The status of the machine is shown at any given moment on the right upper part of the screen of the main
menu (green light if the status is OK and red light and a warning icon in the case of malfunction). The machine will not
work unless no warning lights are shown on the screen. The current date and time are also shown on the right upper
side of the screen. In the centre of the screen you can find the language icons (flags) and the access to the different
use modes (explained in the next paragraph). The button part of the screen shows the current user identification (if it
is set up), who will be able to start or finalize the session by pushing this button. You do not need to start a session to
have the machine started: this will only give you access to the different operating modes.
21
ENGLISH