Connecting To Electricity Source - Sima DEL-32 Manual De Instrucciones

WARNING:
The machine electrical tension is visible on the VOLTAGE indication next to the top of engine
terminals and on the machine characteristics plate. If for any reason you change the electrical
configuration of the machine from 400V to 230V, change the voltage indication stickers in order to
avoid damage.
Do not plug the machine to the electricity if you are not sure of the available electrical tension. If the
tension is not correct, the engine will undergo irreparable harm or out of service.
Do not perform any electrical work on the machine unless it is disconnected from the mains.
VERY IMPORTANT: Earth should always be connected before the machine is switched on.

7.2 CONNECTING TO ELECTRICITY SOURCE.

The machine has a display so that the user can see the voltage supplied to the machine before the voltage
reached the electrical components and causes any damage.
To connect the machine, do the following:
1. Open the door and connect the socket to the electrical box socket. This way the electricity will not reach
the motor and you can see the voltage coming into the machine.
TRANSFORMER
10
MOTOR
ENGLISH