Maintenance, Inspection And Control - Sima DEL-32 Manual De Instrucciones

7. GEOLOCATION DEVICE: The models DEL TRONIC and COMBI TRONIC can be fitted with an optional
geolocation device. This will let the owner to locate the machine in real time, also knowing the history of
the machine movements, its status (on or off), the service time delivered and the machine remote locking
/ unlocking through a web platform managed by SIMA S.A.

12. MAINTENANCE, INSPECTION AND CONTROL.

1 First oil change after 1000 hours of use if mineral oil is used and then again after 3000/4000 hours if the oil
used is synthetic or after 3 years of use if these hours aren´t reached. If synthetic oil is used change oil after
20,000 hours.
2 Grease the holes where the pins and mandrels go and also the bottom of the pins and mandrels, this will also
help avoid build up of rust.
3 At the end of the day disconnect the machine.
4 Cover the machine at night to protect from rain.
5 When possible remove debris from the inside of the machine.
6 Clean the exterior and grease pins and mandrels frequently.
7 Check the blades on the cutter (every 8 days of use) to see if they need changing.
8 Check oil level in the gear box (every month) if the level has
gone down be sure to fill up.
17
ENGLISH