Switching Phases To Achieve The Correct Bending Direction For The Plate; Bending With Support Device Or Mandrels - Sima DEL-32 Manual De Instrucciones

7.4 SWITCHING PHASES TO ACHIEVE THE CORRECT BENDING DIRECTION FOR THE PLATE.

To change the bending
direction, you will have to
open the pin and interchange
the threads or phases as
indicated in the image.

8. BENDING WITH SUPPORT DEVICE OR MANDRELS.

The bending support accessory is used to bend bars
up to Ø16mm to support the bar all the way to the
bending area. This will help stop the bar from flexing
and deforming.
Mandrels are used for bars thicker than Ø16mm as
the rigidity is sufficient that there will be no
deformation.
12
ENGLISH