Special Attachments - Sima DEL-32 Manual De Instrucciones

For the DEL TRONIC and COMBI TRONIC models, the manual mode is recommended when the machine is
cutting continuously. Cyclic cuttings can also be performed in automatic mode by programming a 180º angle (which is
the one that fully locks the jaw blades).

11. SPECIAL ATTACHMENTS.

The bending and combined machines can use certain accessories that do not come included with the machine.
These attachments perform different functions as:
1. STIRRUP DEVICE: This device is for making stirrups.
3. BIG DIAMETER DEVICE: This device aids in
complying with EU safety regulations for
large bends. It is composed of a series of
accessories and mandrels with a minimum
radius for each bar diameter.
2. SPIRAL DEVICE: This device is used to make
spiral formations with rebar. Bars of diameter 6mm to
20mm can be used.
15
ENGLISH