Position Of The Machine And The Operator, Connection And Disconnection - Sima Bali 700 MKNO Manual De Instrucciones Original

9.3 POSITION OF THE MACHINE AND THE OPERATOR, CONNECTION AND DISCONNECTION

The machine needs to be installed in well illuminated, stable and plane surface, free from any obstacles.
Before starting-up the machine, we should have gone through all necessary safety measures (electrical
connection, stability, protections, etc....) as mentioned in the previous chapters.
When installing the machine, make sure the table on which it will be placed should be a horizontal, non bland
surface.
This machine is not to be used under rain and always work in good illumination conditions.
To start cutting, the operator should stand in from of the machine. In this position, the operator can easily
manage the cutting head and the piece to be cut. He/she will also have easy access to the electrical plug.
Once the power supply cable is connected, the motor and the water puma start-up only by pressing the green
switch button.
The machine can be stopped, simply by pressing the red switch button.
The cut should be made by pushing the lever, if the material is small or unstable then it can be
held in place by hand
Start the cut slowly and then progress according to the power of the blade, do not force the blade.
The water pump will start automatically, make sure the water is flowing before starting the cut.
13
ENGLISH