Blatchford Elan Serie Manual De Instrucciones página 30

13.1 Using the Elan PC Software Interface
DO NOT use a laptop computer or similar device with an external
power supply when connected to the Elan.
Take all necessary precautions when moving and walking with
the Elan connected by cable to a laptop computer to avoid
accident or injury.
Note:
Disconnecting the comms cable from the
Elan user
(Software versions 1.0.5 or later)
It is possible to disconnect/reconnect the Elan from
the laptop and comms cable during set up, except
when the calibration sequence is updating the
settings and the update Elan settings dialogue box
appears (See Section 9.5 for the calibration sequence).
Disconnect when the calibration ready rotating
symbol appears, reconnect to update and commence
the next stage.
Only disconnect/reconnect from the phono jack at
the Elan not from the USB. Disconnecting at the USB
will lose the Com port connection requiring a new
log in.
Launching the Interface
1
Plug the Comms Cable, adapter and Micro-D
Interface Cable into the Elan and a USB port on the
laptop then launch the Software Interface Program
on the laptop computer (see Section 9.1).
2
At the Login to Elan Interface screen
Enter Name and Password if required then
Click on [Login]
3
At the Bluetooth Connection screen
Click on [Auto connect]
or
Select the previously noted
USB Serial Port Number (COM_)
from the pull down Menu.
The visual indicators at the bottom of the screen
will be active on connection.
4
Continue the set-up and calibrate the Elan for
walking see Sections 9.3-9.6.
A
B
Updating calibration settings
dialogue box
28
Updating Elan settings 93%
Cancel
calibration ready
rotating symbol
A B
visual indicators
938317S/3-0719