Putting Into Operation; Use Of The Appliance; Inserting Trays; Removing Trays - Hupfer TAG-1/53-37 Manual De Instrucciones

Tray stackers

Putting into operation

Use of the appliance

Taking out of operation

43.3004.1
Before the appliance is put into operation it must be clean and dry.
Observe the safety instructions from page 16 onwards.
Stacker TAG-1/53-37 has no internal compartment panelling. It is therefore
not suitable for universal trays 460 x 344 mm, breakfast trays 325 x 212 mm
and trapezoidal trays B = 480/H = 350 mm.
The semi-open construction of stacker TA-2/53-37 is only suitable for EN- und
GN-trays. Other tray sizes should not be used.

Inserting trays

• The stacking height must be correctly set before the trays are inserted.
• Insert the trays individually or in small easy-to-handle stacks.
Tabletts einsetzen:
• Place and slowly lower the first tray on to the centre of the stacking point.
• Place the other trays so as to fit precisely on to the trays already in the
stacker.
• The stacker is filled to the maximum level when the tops of the tray stack
are about 5 cm above the top edge of the stacker.

Removing trays

• Remove trays from the stack.

Transport

Observe the safety instructions from page 16 onwards.
• Release both locking brakes.
• Grip the appliance by the sliding handles and move it to the destination.
• At the destination, lock both locking brakes in order to secure the appliance
against inadvertent movement.
• Clean the appliance.
19