Cleaning/Maintenance; Cleaning & Maintenance; Cleaning; General Maintenance - Parkside POFA 12 A2 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 153
Continuously check that the
groove has a right angle.
6. For deeper grooves, repeat work
steps 4-5 until you achieve the
desired result.

Cleaning/maintenance

Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts. In this way you avoid dam-
age to the appliance and possible
injury to people.
Remove the battery from the device
before all cleaning and mainte-
nance work and before transporting
it. If the device is switched on acci-
dentally, there is a danger of injury.
Always wear protective gloves
when handling cutters to avoid cut-
ting yourself.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Do not use cleaning agents or sol-
vents. You may otherwise irrepara-
bly damage the appliance.
Keep clean the ventilation slots, motor
housing and handles of the appliance. Use
a damp cloth or a brush.

General maintenance

• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
• If the ball bearing (a) of a
cutter has come loose, re-tighten
it using an Allen key.

Storage

• Clean the device prior to storage.
• Store the appliance in a dry place well
out of reach of children.
• Store the cutter in the packaging includ-
ed in the delivery. Avoid contact with
other metal parts or cutter blades.
Waste Disposal/envi-
ronmental protection
Remove the rechargeable battery before
disposing of the device.
The device, accessories and packaging
should be properly recycled.
Instruction on how to dispose of the rechar-
geable battery can be found in the separa-
te instruction manual for your battery and
charger.
Electrical machines do not belong
in domestic waste.
• Return the unit to a recycling centre. The
plastics and metals in the unit can be
sorted and appropriately recycled. Ask
our Service Centre for details.
• Defective units returned to us will be dis-
posed of for free.
GB
IE
a
35
Tabla de contenido
loading

Tabla de contenido