Selecting A Location - STACK-ON PS-10-B-12 Instrucciones

SELECTING A LOCATION

The safe must be mounted to a wall
stud, and a permanent shelf or the
floor. For optimal safety and security,
the safe should be installed in an
isolated, dry and secure area.
THE SAFE SHOULD ALWAYS BE
KEPT OUT OF THE REACH OF
CHILDREN.
SECURING THE SAFE
NOTE: This safe must be mounted to a
wall stud, and a permanent shelf or the
floor. Failure to do so will compromise
the safety and security of the safe.
NOTE ON LOCKING THE SAFE: The safe
needs to be in an upright position, as
shown in figure 1, for the locking
mechanism to function properly. Failure
to mount the safe in the correct upright
position will compromise the safety and
security of the safe.
Figure 1
Secure the safe to a wall stud, and a
permanent shelf or floor, using the predrilled
mounting holes in the safe.
NOTE: The safe must be secured to a
wall stud on one side of the safe in the
top and bottom holes in the back of the
safe so that it is anchored to the wall stud
in two locations. Wall anchors should be
used on the other side. The safe should
also be mounted to a permanent shelf or
the floor. Use the hardware provided or
consult your harware retailer for
fastening hardware for your particular
mounting surfaces.
Mark the holes to be used. Drill the
appropriate diameter and depth of pilot
holes depending on the type of hardware
being used and the mounting surface.
Secure the safe with the fasteners.
(Figure 2)
Figure 2
5
24
40346-1306