SELECTING A LOCATION
Your Security Cabinet should be installed in an isolated, dry and secure area.
For greater security the cabinet must be fastened to a solid surface with a
minimum space on either side. Ideally the cabinet would be installed on the side
wall of a closet. (See Figure 8)
The cabinet should be flat against the wall and floor. Remove the baseboard if
necessary. (See Figure 9)
Insert the 2 Plastic Plugs in the cabinet's top mounting holes if you are not
installing the Pistol-Ammo cabinet on the top of the security cabinet (See Figure
9).
WALL MOUNT OPTION
The (4) mounting holes in the rear of the cabinet must line up with the 16"
centers of the wall studs. Drill new holes in the cabinet if necessary. (See
Figure 8)
Drill (4) 3/16" pilot holes into the wall studs and secure the cabinet to the wall
using (4 ea.) lag bolts and washers. (See Figure 9)
FLOOR MOUNT OPTION
Drill (2) pilot holes and secure the cabinet bottom to the floor with (2) lag bolts
and washers. (See Figure 9)
OPTIONAL INSTALLATION OF GCB-500-5 PISTOL-AMMO CABINET ON
TOP OF SECURITY CABINET
NOTE: We recommend that security cabinet be installed as described above.
IMPORTANT: Install the shelf before mounting the cabinet to a wall.
Remove the top hole plugs from the bottom cabinet by pushing out from the
inside of the cabinet.
Place the GCB-500-5 on top and assemble with (2) 1/4-20 nuts and bolts. Do
not tighten bolts. (See Figure 10)
Drill (4) 3/16" pilot holes into the wall studs and secure the GCB-500-5 cabinet
to the wall using (2) lag bolts and washers. (See Figure 10)
Tighten the (2) bolts that connect the cabinets.
IMPORTANT
Keep keys away from children. Keep this record of your serial and key
numbers in a secure place separate from your security cabinet. If you
lose your keys you will need this information as a reference for obtaining
new keys. To order a replacement key set, follow the instructions on the
attached form.
STACK-ON PRODUCTS COMPANY
P. O. BOX 489
WAUCONDA, IL 60084
16"
CENTERS
CABINET
TOP VIEW
MINIMUM
Figure 8
PLASTIC
PLASTIC
PLUGS
PLUGS
Figure 9
Figure 10
40155-1204
5 21